![]() |
|
كيف تحويل هذا السورس إلى لغة الدلفي - نسخة قابلة للطباعة +- delphi4arab منتديات دلفي للعرب (https://delphi4arab.net/forum) +-- قسم : منتديات دلفي للعرب التعليمية (https://delphi4arab.net/forum/forumdisplay.php?fid=3) +--- قسم : سؤال و جواب حول دلفي (https://delphi4arab.net/forum/forumdisplay.php?fid=15) +--- الموضوع : كيف تحويل هذا السورس إلى لغة الدلفي (/showthread.php?tid=4116) |
كيف تحويل هذا السورس إلى لغة الدلفي - ouanani - 17-04-2012 السلام عليكم ورحمة الله وبركاته كود : #!/bin/bash
# by neXus April 2011
# v1.1
# Changelog
# 26/04/2011 - Fixe size issue for webui, escape var to allow white space in path
function Get_Bytes
{
xxd -ps -s $2 -l 4 -g 16 -c 4 "$1"
}
function Get_LowHigh
{
echo $1 | sed -r 's/([0-9a-f][0-9a-f])+([0-9a-f][0-9a-f])+([0-9a-f][0-9a-f])+([0-9a-f][0-9a-f])/\4\3\2\1/'
}
function Get_Version
{
Get_Bytes "$1" 12 | awk '{printf("%s.%s.%s.%s",strtonum("0x"substr($1,1,2)),strtonum("0x"substr($1,3,2)),strtonum("0x"substr($1,5,2)),strtonum("0x"substr($1,7,2)))}'
}
function Get_Hash
{
xxd -ps -s $2 -c 1 "$1" | awk '{sum+=strtonum("0x"$1)} END{printf "%08x",sum}'
}
function WebUI_Unpack
{
SEEK=16
END=`stat --printf %s "$1"`
BASE=$1_extracted
echo "Extracting to $BASE"
while [ $SEEK -ne $END ]; do
#Get size of filename
N_SIZE=`echo $(Get_LowHigh $(Get_Bytes "$1" $SEEK)) | awk '{print strtonum("0x"$1)}'`
let SEEK+=4
#Get file name
NAME=`xxd -s $SEEK -l $N_SIZE "$1" |xxd -r`
let SEEK+=$N_SIZE
# Test for bit. if 01 its a file else folder
STR_BIT=`xxd -ps -s $SEEK -l 1 "$1"`
let SEEK+=1
if [ $STR_BIT = "00" ]; then
echo ">Folder $NAME"
mkdir -p $BASE$NAME
else
#Get file size
F_SIZE=`echo $(Get_LowHigh $(Get_Bytes "$1" $SEEK)) | awk '{print strtonum("0x"$1)}'`
let SEEK+=4
echo ">File $NAME ($F_SIZE)"
# Check file path
[ ! -d $BASE`dirname $NAME` ] && mkdir -p $BASE`dirname $NAME`
# Dump the file
dd if="$1" of=$BASE$NAME bs=1 skip=$SEEK count=$F_SIZE > /dev/null 2>&1
let SEEK+=$F_SIZE
fi
done
}
function WebUI_Pack
{
# create binary package
read -p "Type the name of bin output: " BIN_FILE
read -p "Type the version to set : (xx.xx.xx.xx) " VERS
[ -z "$BIN_FILE" ] && echo "Please set a name" && exit 1
OUTPUT="`pwd`/$BIN_FILE"
BASE="$1"
[ -f "$OUTPUT" ] && rm "$OUTPUT"
DATA="$OUTPUT.data"
HEADER="$OUTPUT.header"
# find files and folder
cd "$1"
echo "Remove existing headers"
find -iname "*.header" -delete
echo ">Adding version to output"
echo "00:"`echo $VERS |awk -F. '{printf("%02x%02x%02x%02x",$1,$2,$3,$4)}'` |xxd -r >"$DATA"
for item in `find | sed '/^.$/d' `; do
# debug for item in `cat files.list | sed '/^$/d' |sed 's/\//\.\//'`;do
echo "Packing -> $item"
NAME=`echo $item |sed 's/^\.//g'`
N_SIZE=$(Get_LowHigh `echo -n $NAME | wc -m | awk '{printf("%08x",$1)}'`)
if [ -f $item ]; then
F_SIZE=$(Get_LowHigh `stat --printf %s $item | awk '{printf("%08x",$1)}'`)
# create the header file we need to process by step
RAW_HEX=$N_SIZE`echo -n $NAME | xxd -ps`"01"$F_SIZE
else
# create the header file for folder
RAW_HEX=$N_SIZE`echo -n $NAME | xxd -ps`"00"
fi
CAR=`echo $RAW_HEX -n |wc -m`
POS=0
count=0
while [ $POS -lt $CAR ]; do
PART=`echo ${RAW_HEX:$POS:16}`
let POS+=16
echo "$count: $PART" | xxd -r >> "$item.header"
let count++
done
# create the output file with header and file or header only if folder
cat "$item.header" >> "$DATA"
[ -f "$item" ] && dd if="$item" of="$DATA" conv=notrunc oflag=append > /dev/null 2>&1
done
# create header with size / crc / version
echo ">Calculating checksum"
CHKS=$(Get_LowHigh $(Get_Hash "$DATA" 0))
echo ">Get Size"
SIZE=$(Get_LowHigh `stat --printf %s "$DATA" | awk '{printf("%08x",$1+12)}'`)
echo ">Write Header"
echo -n "0: BD9A0C44 $CHKS $SIZE" | xxd -r > "$HEADER"
cat "$HEADER" "$DATA" > "$OUTPUT"
echo ">Check Integrity :"
echo -e "\t->Version : $(Get_Version "$OUTPUT")"
sum32=$(Get_LowHigh $(Get_Bytes "$OUTPUT" 4))
calc_sum32=$(Get_Hash "$OUTPUT" 12)
[ ! "$sum32" = "$calc_sum32" ] && echo " !!!! checksum mismatch ! File Corrupted" && exit 1
echo -e "\t->Checksum verified ($sum32)"
echo
echo "Firmware successfully packed to $OUTPUT"
find -iname "*.header" -delete
}
# main actions
function webui
{
if [ -f "$1" ]; then
echo "Checking for file : $1"
echo ">Version : " $(Get_Version "$1")
sum32=$(Get_LowHigh $(Get_Bytes "$1" 4))
calc_sum32=$(Get_Hash "$1" 12)
[ ! "$sum32" = "$calc_sum32" ] && echo "checksum mismatch ! File Corrupted" && exit 1
echo ">Checksum : $sum32"
echo
read -p "> Unpack ?(y/n)" ANS
[ ! "$ANS" = "y" ] && exit 0
echo "Unpacking Files..."
WebUI_Unpack $1
else
echo "Packing a webui"
WebUI_Pack "$1"
fi
}
function firmware
{
if [ -f "$1" ]; then
echo "Unpacking firmware $1"
LINUX_SIZE=`echo $(Get_LowHigh $(Get_Bytes "$1" 12)) | awk '{print strtonum("0x"$1)}'`
ROOTFS_SIZE=`echo $(Get_LowHigh $(Get_Bytes "$1" 16)) | awk '{print strtonum("0x"$1)}'`
mkdir -p "$1"_extracted
echo ">Extracting linux.bin ($LINUX_SIZE)"
dd if="$1" of="$1_extracted"/linux.bin bs=1 skip=20 count=$LINUX_SIZE > /dev/null 2>&1
echo ">Extracting rootfs.img ($ROOTFS_SIZE)"
dd if="$1" of="$1_extracted"/rootfs.img bs=1 skip=$((20+$LINUX_SIZE)) count=$ROOTFS_SIZE > /dev/null 2>&1
echo "Done extracting firmware"
else
echo "Packing firmware"
echo ">Looking for file to pack in $1"
[ ! -f "$1/linux.bin" -a ! -f "$1/rootfs.img" ] && echo "Missing files !!" && exit 1
LINUX_SIZE=`stat --printf %s $1/linux.bin`
echo -e "\t linux.bin ($LINUX_SIZE)..OK"
ROOTFS_SIZE=`stat --printf %s $1/rootfs.img`
echo -e "\t rom1fs ($ROOTFS_SIZE)..OK"
echo
read -p ">Give a name to your firmware : " NAME
LINUX_SIZE=$(Get_LowHigh `echo -n $LINUX_SIZE | awk '{printf("%08x",$1)}'`)
ROOTFS_SIZE=$(Get_LowHigh `echo -n $ROOTFS_SIZE | awk '{printf("%08x",$1)}'`)
[ -f "$NAME" ] && rm "$NAME"
echo ">Generate header"
HEADER1="0000000: 424E4547 01000000 01000000 $LINUX_SIZE"
HEADER2="0000010: $ROOTFS_SIZE"
echo $HEADER1 |xxd -r > "$NAME.header"
echo $HEADER2 |xxd -r >>"$NAME.header"
echo ">Generate firmware"
cat "$NAME.header" "$1/linux.bin" "$1/rootfs.img" > "$NAME"
rm "$NAME.header"
echo "Done genrating $NAME"
fi
}
function show_usage
{
cat <<EOT
.:: Foscam Resource ToolKit ::.
$0 --webui|--firm file|folder
You can use this piece of script to :
- Pack and unpack webui resource
- Pack and unpack firmware resource
Usage :
Unpack webui : $0 --webui file.bin
Pack webui : $0 --webui webui_folder
Unpack firmware : $0 --firm file.bin
Pack firmware : $0 --firm firmware_folder
(note the firmware folder must contain rootfs.img and linux.bin files)
EOT
}
# main programm
[ $# -ne 2 ] && show_usage && exit 0
if [ $1 = "--webui" ]; then
webui "$2"
elif [ $1 = "--firm" ]; then
firmware "$2"
else
show_usage
fiبأي لغة هذا السورس؟ كيف تحويل هذا السورس إلى لغة الدلفي - Agmcz - 17-04-2012 السلام عليكم مكتوب بلغة bash script كيف تحويل هذا السورس إلى لغة الدلفي - kachwahed - 18-04-2012 وعليكم السلام ورحمة الله وبركاته Bash هو إحدى أشهر لغات سطر الأوامر على Linux http://en.wikipedia.org/wiki/Bash_%28Unix_shell%29 مثال بسيط لفحص ناتج تعليمة ls (يقابلها dir على ويندوز) PHP كود : #!/bin/bashأو ارسال التعليمات بـ WinExec أو ShellExecute استخدم البحث بالتوفيق. كيف تحويل هذا السورس إلى لغة الدلفي - ouanani - 18-04-2012 بارك الله فيكم اخواني جاري البحث والتحري وان شاء الله اجد ضالتي |